Wifi Set Up

HOW DO I CONNECT TO MY INTERNET DEVICE OVER WIFI?

Dynami Wireless Internet Device allows for you to connect over WIFI to access the internet.To get started, make sure your Internet Device is connected, powered up and is displaying a green WIFI signal in the front panel of the device 

 Now using your wireless device, search for the available wireless (WIFI) networks and make a connection to network that displays "LTE CPE_XXXX", this is your new network.

 You will be required to provide your WIFI KEY this is also called a wireless password (passphrase), this can be found on the bottom of your internet device:

Upon successful WIFI connection, you should be able to access the internet and start enjoying your new internet service. If you are interested in updating your device from the default password, then continue to read on.

HOW DO I CHANGE MY WIFI PASSWORD?

Dynami Wireless Internet Device is completely customizable to your needs, here we will explain how to change your WIFI password.

Follow the steps listed below to change your WIFI KEY:

 Step 1. Make sure your device is connected to the Dynami Wireless Internet device. 

Step 2. Open an up an internet browser such as Google Chrome.

Step 3. Type in the following information in the URL section of the web browser, 192.168.100.1 and then hit enter.

Step 4. Enter the password to access the modem, The default password is the word "admin". 

Step 5. You will now be at the Dynami Wireless internet device home page, now look for a section that says NETWORK SETTINGS, in the box you will be able to find the link to update your WIFI settings, click on the WIFI settings link to continue.

Step 6. After you click on the WIFI settings link above, you will now have access to change the WIFI KEY, in this menu you can also change the WIFI Name from (SSID) to what ever you like.

Screen Shot 2019-04-22 at 2.41.40 PM.png

Step 7. After you have completed the changes above, hit apply to save your changes. Remember any devices connected to the previous WIFI network will have to be reprogrammed to connect to the new network you just created. It is recommended after you have saved your changes to the internet device to power cycle the device.